Jinlong No. 1 Pro white DTF hot melt powder 120 to 170 micron

Fine White DTF Powder

No. 1 Fine White DTF TPU Hot Melt Powder

PRODUCT CODE: No. 1

A 120-170 um fine white TPU powder for cotton, polyester, blends and most fine-fiber fabrics.

Particle Size
120-170 um
Melting Point
125-128 C
Color
White
Grade
Fine
Request a Sample Kit Ask for TDS

Sample availability and technical documents are confirmed after review.

01 / Product Overview

A practical fine-powder starting point

No. 1 is positioned as a broadly applicable white TPU powder for everyday DTF transfer work on common apparel fabrics with relatively fine fiber structures.

120-170 um

Fine, controlled grade

A defined particle-size range for consistent powder selection and process documentation.

Broad Fit

Common apparel fabrics

Suitable for cotton, polyester, blends and most fine-fiber fabrics after application testing.

40 / 60 C

Laundry references

The supplied TDS records excellent results at 40 C and good results at 60 C.

02 / Technical Overview

Product data at a glance

Use these values as a starting point and verify final settings on the target printer, powder, fabric and heat press.

Material / appearance
White PU powder
Particle size
120-170 um
Melting point
125-128 C
Melt index
27.2-150-2.16 (source notation)
Specific gravity
1.21 g/cm3
Shore hardness
76
Tensile strength
9.4
Ultimate elongation
880
100% modulus
3.0
Tear strength
50
Reference bonding temperature
150-160 C
Reference pressure
1.5-2.0 kg/cm2
Reference time
5-10 seconds

03 / Process Window

Recommended production sequence

Record the final printer, curing and pressing parameters after testing the complete material combination.

  1. 01

    Print

    Print with compatible DTF pigment ink on a matched transfer film.

  2. 02

    Apply Powder

    Cover the wet ink evenly and remove loose excess powder.

  3. 03

    Cure

    Cure until the adhesive layer is uniform without overheating the ink.

  4. 04

    Press

    Begin with the TDS reference window and calibrate for the fabric.

  5. 05

    Test

    Check peel, hand feel, stretch and wash behavior before bulk production.

04 / Applications

Is No. 1 Powder right for your fabric?

Use fabric construction, artwork coverage and required hand feel to confirm whether this fine grade is the best match.

Cotton

Everyday apparel

A practical starting point for cotton T-shirts and common garment transfers.

Polyester

Migration test required

Suitable for many polyester applications after dye-migration and bonding tests.

Blended Fabrics

Confirm adhesion

Validate bonding and hand feel across mixed fiber constructions.

Fine-Fiber Fabrics

Even coverage

Designed for most fine-fiber surfaces where even powder coverage is important.

Close-up illustration of No. 1 fine DTF powder bonding within textile fibers

05 / Actual Test Results

Actual process footage shows how Jinlong evaluates transfer materials beyond a static specification table.

Wash-test process

Material preparation, DTF printing and wash-testing footage.

06 / Product Family

Choose the powder grade for the target workflow

Compare the published Jinlong powder grades by particle-size range and intended selection path. Final suitability is confirmed by sample testing.

No. 1Fine PowderCotton, polyester, blends and most fine-fiber fabrics120-170 um No. 2Medium-Fine PowderSelect after fabric and complete-system testing100-200 um 02BCoarse PowderSelect after fabric and complete-system testing80-200 um No. 6Ultra-Fine PowderSelect after fabric and complete-system testing60-100 um BlackAnti-Sublimation PowderFor dye-migration-control testing106-250 um

06 / Supply Information

Packaging, documents and support

Final commercial details are confirmed for the requested specification, quantity and destination.

Available Sizes

Powder grade and order format are confirmed for the requested application.

Packaging

1 kg sample pouches are available for evaluation; bulk packaging is confirmed with the order.

MOQ

Confirmed according to powder grade, packaging and destination.

OEM / Customization

OEM / ODM packaging and matched-material support are reviewed by project.

Documents

Current TDS and available compliance documents are supplied after product confirmation.

07 / Matched Materials

Build a stable DTF system

Combine compatible film, TPU powder and pigment ink, then validate the complete process on the intended printer and fabric.

01

DTF Film

Choose surface, release method and width.

 02

TPU Powder

Match fabric, hand feel and wash requirements.

 03

DTF Ink

Confirm color and white-ink stability.

08 / Product FAQ

Questions about No. 1

Production settings should be validated on the customer's equipment, material combination and fabric.

Matched Material Testing

Need a matched sample for your workflow?

Send your target fabric and production requirements. Jinlong will review a suitable material combination before bulk production.

Request a Sample Kit